Bostik Car Silicone Sealant – Black 280ml
R265.00
A flexible silicone sealant for vehicles.
- 100% Waterproof
- Permanently Flexible
- Low Shrinkage
- Excellent Colour Fastness
- Description
- Additional information
- Brand
- Reviews (0)
Description
Bostik Car is a black, one part acetoxy curing high quality silicone sealant that provides a permanent flexible, durable, watertight seal for inside, outside and underneath the car. The sealant is extremely resistant to UV radiation, weathering, ageing and water, and offers excellent chemical resistance and is unaffected by alcohols, diluted acids, alkalis, and detergents. Excellent for sealing joints, gaps and cracks inside, outside and underneath the car, such as sealing of leaking window joints and water hoses, low temperature gasket applications and replacing of windscreens. Also ideal for sealing, bonding, and mending DIY tasks around the house where a black colour sealant is required.
Not suitable for cylinder head gaskets or for parts permanently exposed to fuel. Not suitable for alkaline surfaces such as concrete, fibrous cement, asbestos, plaster and marble. Not suitable for some metals i.e. mild steel, lead, copper, tin, galvanized iron, brass or zinc as it may cause corrosion. May become discoloured in contact with some organic elastomers, which tend to bleed oil or solvents into the silicone, e.g. EPDM, APTK, Neoprene and Bituminous surfaces. Not suitable for mirrors as it will de-silver the mirror backing, affecting the front appearance of the mirror. Not suitable for contact with natural stone i.e. marble, granite, quartzite as it may discolour the surfaces. Will not adhere to some plastics such as polyethylene, polypropylene and Teflon. Do not apply sealant when relative humidity is below 10% – cure rate will be affected.
NOT SUITABLE FOR FISH TANKS (contains a fungicide).
NOT paintable.
How to use
Ensure surfaces are clean, dry and free of loose materials, dust, grease, rust and other contaminants. Use masking tape to get a clean, even sealant line and to eliminate cleaning difficulties on porous surfaces. Remove tape before sealant skins.
280ml Cartridge
- Cut the tip off the cartridge and screw on the nozzle.
- Cut the tip of the nozzle at an angle to achieve the desired bead size.
- Apply with a caulking gun in a continuous bead to the prepared joint.
- Remove unwanted silicone immediately.
- Smooth down after application within 3-5 min before skin formation occurs, by using a flat or rounded tool.
- Sealant dries to touch in approximately 45 minutes and reaches full cure after approximately 24 hours.
Additional information
| Brand | Bostik |
|---|---|
| Product Category | Maintenance |
| Product Type | Sealant |
Brand
Bostik
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.